Panasonic KX-TG2481CB Operating Instructions Manual Download Page 25

Page: 25 / 84

Preparation

Press

(FUNCTION/EXIT/CH)

Press

repeatedly until the arrow

points to “

Program

”.

Press

FWD/EDIT

(

Yes

key).

Press

repeatedly until the arrow

points to “

TAD program

”.

Press

FWD/EDIT

(

Yes

key).

•

“P” is displayed on the base unit.

Press

(0)

•

“

Set time

” is announced.

If previously adjusted, the day/time will be heard.

Enter the time (hour and minute) using a 4-digit number.
(Example: To set 9:30, enter “0930”.)

•

The last two digits of the entered number are displayed.

Press

(*)

to select “AM” or “PM”.

Press

(#)

repeatedly to set the day.

Press

FWD/EDIT

(

Save

key).

•

The unit announces the day/time. The clock starts working.

•

If 6 beeps sound, the setting is not correct. Start again from step 5.

•

To return to the standby mode, press

(FUNCTION/EXIT/CH)

Day and Time Adjustment

Voice Time/Day Stamp:

During playback, a synthesized voice will

announce the day and time that each message was recorded.

Talk switching

TAD program

=Yes

Save directory
Ringer volume

=Yes

Program
LCD contrast

=Yes

Save DIRECT#
Set flash time

=Yes

Refer to manual
or see label
on base unit.

Summary of Contents for KX-TG2481CB





















































































Search results

Summary of Contents for KX-TG2481CB

Reviews:

Related manuals for KX-TG2481CB

Brands by name

Popular brands

Panasonic KX-TG2481CB, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2481CB

Reviews:

Related manuals for KX-TG2481CB

Brands by name

Popular brands