Panasonic KX-TG2383B Operating Instructions Manual Download Page 53

Page: 53 / 80

Answering System

For assistance, please call: 1-800-211-PANA(7262)

•

The unit will announce the remaining recording time after playback, if it is less
than 5 minutes.

•

If a call is being received during the remote operation, you will hear incoming
call tones (p. 48). To answer the call, press

•

If you hear “

Memory full

” after playback, erase some, or all, of the messages

(see below).

Direct commands

NEW MESSAGE PLAYBACK

•

Only new messages are
played back.

ALL MESSAGE PLAYBACK

•

All messages are played back.

REPEAT (During playback)

•

The current message is
repeated.

•

If you press within 5 seconds
of playback, the previous
message will be played.

•

You can also press

repeat a message.

SKIP (During playback)

•

The current message is
skipped. The next message is
played.

•

You can also press

to skip

a message.

STOP

•

Operation is stopped
temporarily.

•

To resume operation, enter a
direct command within 15
seconds, or the voice menu
will start (p. 52).

(4)

(5)

(1)

(2)

(9)

ERASING A SPECIFIC
MESSAGE
(During playback)

•

The current message is
erased.

•

A short beep will sound
and the next message will
be played.

ERASING ALL MESSAGES

•

All recorded messages are
erased.

•

A long beep sounds, and
“

No messages

” is heard.

ANSWERING SYSTEM OFF

•

“

Answer off

” is heard and

the Answering System is
turned off.

ANSWERING SYSTEM ON

•

“

Answer set

” is heard and

the Answering System is
turned on.

(*)(4)

(*)(5)

(0)

(8)

Summary of Contents for KX-TG2383B

















































































Search results

Summary of Contents for KX-TG2383B

Reviews:

Related manuals for KX-TG2383B

Brands by name

Popular brands

Panasonic KX-TG2383B, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2383B

Reviews:

Related manuals for KX-TG2383B

Brands by name

Popular brands