69
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
General
Problem
The unit does not work.
You cannot program items,
such as the dialing mode.
Cause & Remedy
•
Check the settings (p. 9–11).
•
Check whether the dialing mode setting is
correct (p. 16).
•
Charge the battery fully (p. 10).
•
Clean the charge contacts and charge again
(p. 11).
•
Install the battery properly (p. 10).
•
Unplug the AC adaptor of the base unit to
reset. Plug in, and try again.
•
The handset has not been registered to the
base unit. Register the handset (p. 63, steps
5 and 6).
•
Re-install the battery (p. 61) and charge it fully.
•
After you register an additional handset to the
base unit, please confirm that the other (first
one and second one) pre-registered handsets
display “
Talk
” by pressing
. If one of the
handsets does not display “
Talk
”, re-register
that handset to the base unit.
•
Programming is not possible while the
handset is being used.
•
Do not pause for over 60 seconds while
programming.
•
Move closer to the base unit.
•
Ö
,
Ñ
,
Ü
or
á
may have been pressed
when you picked up the handset. Press
(OFF)
and try again.
•
If more than one other user is using the
handsets, you may not be able to program.
Try again later.
