Panasonic KX-TEB308 Features Manual Download Page 94

Page: 94 / 270

1.12 Holding Features

Feature Guide

1.12.4 Music on Hold

Description

An outside party on hold will hear audio to inform the party that the call is still on hold.

The following types of audio are available depending on the user's country/area:

Internal audio source

External audio source

Tone

The audio sources (internal and external) can also be used for BGM (

1.15.4 Background Music (BGM)).

Conditions

•

Hardware requirement:

A user-supplied audio device, such as a CD player or radio for External audio

source.

•

The audio can be selected through system programming (

Music on Hold [111]).

•

Operations such as Call Hold (

1.12.1 Call Hold) and Call Transfer (

1.11.1 Call Transfer) activate

Music on Hold.

Installation Manual References

2.8.1 Connecting Peripherals

Summary of Contents for KX-TEB308















































































































































































































































































Search results

Summary of Contents for KX-TEB308

Reviews:

Related manuals for KX-TEB308

Brands by name

Popular brands

Panasonic KX-TEB308, Features Manual

Search results

Summary of Contents for KX-TEB308

Reviews:

Related manuals for KX-TEB308

Brands by name

Popular brands