Panasonic KX-TEB308 Features Manual Download Page 129

Page: 129 / 270

1.18 Proprietary Telephone (PT) Features

Feature Guide

129

[DSS Console]

Conditions

•

Certain buttons are equipped with a light to indicate the status of the corresponding line or feature.

User Manual References

1.1.1 Before Operating a Telephone

CONF (Conference)

Used to establish a 3-party or 5-party conference call.

FWD/DND (Call
Forwarding/Do Not
Disturb)

Used to set the FWD or DND feature for the extension.

PAUSE

Used to insert a dialling pause in a stored number.

PF (Programmable
Feature)

Used to access a preprogrammed feature (no default). Mostly used as a One-
touch Dialling button.

Button

Usage

Flexible DSS

Used to call an extension with a one-touch operation. Each button is
programmed to correspond to an extension. DSS buttons can also be
customised as different feature buttons.

Used to access a preprogrammed feature (no default). Mostly used as a One-
touch Dialling button.

Button

Function

Summary of Contents for KX-TEB308















































































































































































































































































Search results

Summary of Contents for KX-TEB308

Reviews:

Related manuals for KX-TEB308

Brands by name

Popular brands

Panasonic KX-TEB308, Features Manual

Search results

Summary of Contents for KX-TEB308

Reviews:

Related manuals for KX-TEB308

Brands by name

Popular brands