1.5 Making Call Features
Feature Guide
39
1.5
Making Call Features
1.5.1
Intercom Call Features
1.5.1.1
Intercom Call
Description
An extension user can call another extension user.
Conditions
•
Extension Number/Name Assignment
Extension numbers (
Extension Number [009]) and names (
Extension Name [604], Extension
Name in Cyrillic [616]) can be assigned to all extensions. During intercom calls, the number and name
of the other extension are shown on the displays of proprietary telephones (PTs).
•
DSS Button
It is possible to call another extension simply by pressing the corresponding Direct Station Selection
(DSS) button (
DSS Off-hook Mode [126]). A flexible CO/DSS/MESSAGE button can be customised
as a DSS button.
The DSS buttons on a DSS Console can also be used.
•
Alternate Receiving—Ring/Voice
A PT user can select to receive intercom calls by ring tone or by voice, through personal programming
(Alternate Receiving—Ring/Voice). If a user selects voice-calling, the calling party can talk to the user
immediately after hearing a confirmation tone.
•
Alternate Calling—Ring/Voice
A caller can change the called party's preset call receiving method (ring tone or voice). By doing so,
ring-calling is switched to voice-calling, or vice versa, at the called party. This setting is active for the
current call only, after which it reverts to the called party's previous setting.
•
The extension ring tone pattern for incoming intercom calls can be selected through system
programming (
Extension Ring Tone Pattern [115]). The ringback tone pattern for outgoing intercom
calls and for incoming outside (CO) line calls can also be selected through system programming (
Ringback Tone Pattern [128]).
•
Tone after Dialling
After dialling an extension number, a user will hear one of the following:
Feature Guide References
1.18.2 Flexible Buttons
4.2.1 Tones/Ring Tones
Type
Description
Ringback Tone
Indicates the call is being received at the called party's extension.
Confirmation Tone
Indicates the called party has set voice-calling.
Busy Tone
Indicates the called party's extension is busy.
DND Tone
Indicates the called party has set Do Not Disturb (DND).
Summary of Contents for KX-TEA308
