Panasonic KX-TEA308, Features Manual

Page: 153 / 278

1.20 Administrative Information Output Features
Feature Guide 153
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
Conditions
• Multilingual Display by SMDR
It is possible to select the display language used for SMDR through system programming ( SMDR
Language [806]).
Item Description
Incoming/Outgoing outside
(CO) line call Controls whether incoming/outgoing outside (CO) line calls are
shown (
Incoming/Outgoing Call Selection for Printing [802]). Even
if "On" or "Toll" is selected for outgoing outside (CO) line calls or even
if "On" is selected for incoming outside (CO) line calls, when "MODE
2" is selected in SMDR Mode for Printing [929], the call log
information is not displayed by SMDR, but the information for each
extension is displayed by Call Log Printout.
If "Toll" is selected for outgoing outside (CO) line calls, only calls that
are checked in TRS—COS 2-5 Denied Code [302-305] and are
allowed, are shown.
Caller's identification Controls whether a caller's telephone number is shown ( Caller ID
SMDR Format [906]). When this is set to display telephone numbers,
even if the PBX receives a caller's name by the Caller ID feature, only
the telephone number is shown.
Secret Dialling Controls whether secret dialling numbers stored in System Speed
Dialling Number [001] or stored in One-touch Dialling button are
shown by SMDR (
Secret Number SMDR Print Suppression [803]).
Account Code Controls whether the account code stored in Account Code [310] or
just the index of the account code is shown (
SMDR Account Code
[805]). The index of the account code is shown when "Verify-All" or
"Verify-Toll" is selected in Account Code Mode [605].
System programming items Controls whether system programming items that have already been
assigned are shown based on the following parameters (
System
Data Dump [804]):
a)
All para : All data
b)
System para : All data except for "CO para", "Extn. para",
"DSS para" and "Speed dial"
c)
CO para : The data assigned for each outside (CO) line
d)
Extn. para : The data assigned for each extension
e)
DSS para : The data assigned on the Direct Station
Selection (DSS) buttons and Programmable Feature (PF)
buttons on the DSS Console
f)
Speed dial : The System Speed Dialling numbers and
names in System Speed Dialling Number [001] and System
Speed Dialling Name [011]
g)
Stop output : Not shown