Panasonic KX-TDE200NZ User Manual Download Page 27

Page: 27 / 250

1.1 Before Operating the Telephones

User Manual

Log-in/Log-out of a specified
group

Used to have a Log-in/Log-out button for another incoming call distribution
group.

Log-in/Log-out for all groups

Used to have a Log-in/Log-out button for all groups.

Hurry-up

Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.

Wrap-up

Used to switch the wrap-up status, Ready and Not Ready mode.

System Alarm

Used to confirm a PBX error.

Time Service (Day/Night/
Lunch/Break)

Used to switch the time service mode.

Answer

Used to answer an incoming call.

Release

Used to disconnect the line during or after a conversation or to complete a Call
Transfer.

Toll Restriction/Call Barring

Used to change the toll restriction/call barring level of other extension users
temporarily.

ISDN Service

Used to access an ISDN service.

Calling Line Identification
Restriction (CLIR)

Used to switch between the CLIP and CLIR services.

Connected Line Identification
Restriction (COLR)

Used to switch between the COLP and COLR services.

ISDN-Hold

Used to transfer a call using telephone company.

Headset

Used to talk using the headset.

Time Service Switching Mode
(Automatic/Manual)

Used to switch the time service mode, Automatic or Manual.

Two-way Record

Used to record a conversation into your own mailbox.

Two-way Transfer

Used to record a conversation into the mailbox of a specific extension.

One-touch Two-way Transfer

Used to record a conversation into the mailbox of a specific extension with one
touch.

Live Call Screening (LCS)

Used to monitor your own voice mailbox while an incoming caller is leaving a
message and, if desired, intercept the call.

Voice Mail Transfer

Used to transfer a call to the mailbox of a specified extension.

Network Direct Station
Selection (NDSS)

Used to access an extension connected to other PBXs in the network with one
touch.

CTI

Used to access CTI features.

Check-in

Used to switch the room status of extensions from Check-out to Check-in.

Check-out

Used to switch the room status of extensions from Check-in to Check-out.

Primary Directory Number
(PDN)

Used to make and receive both outside and intercom calls.

Secondary Directory Number
(SDN)

Used to show the current status of another extension, call the extension, and
pick up or transfer calls to it.

Button

Feature

Summary of Contents for KX-TDE200NZ



























































































































































































































































Search results

Summary of Contents for KX-TDE200NZ

Reviews:

Related manuals for KX-TDE200NZ

Brands by name

Popular brands

Panasonic KX-TDE200NZ, User Manual

Search results

Summary of Contents for KX-TDE200NZ

Reviews:

Related manuals for KX-TDE200NZ

Brands by name

Popular brands