Panasonic KX-TDE200NZ User Manual Download Page 226

Page: 226 / 250

4.1 Troubleshooting

226

User Manual

I cannot send a call waiting tone to the
dialled extension.

•

The other party has not set the Call Waiting
feature.

(

Sending a Call Waiting Notification (Call

Waiting), 1.4.4 Answering Call Waiting, 1.8.3
Receiving Call Waiting (Call Waiting/Off-hook Call
Announcement [OHCA]/Whisper OHCA))

•

The other party has set Data Line Security.

(

1.8.9 Protecting Your Line against Notification

Tones (Data Line Security))

I forgot the password.

•

Ask the manager to assist you.
(

2.1.1 Extension Control)

The background music started suddenly.

•

Turn off the music.

(

1.8.8 Turning on the Background Music (BGM),

2.1.4 Turning on the External Background Music
(BGM))

I do not want to display a number which
is stored in memory.

•

Conceal the number.

(

Storing Names and Numbers, 3.1.3 Customising

the Buttons)

I want to confirm my extension number.

•

(

Your Extension Number in 1.1.1 Before

Operating the Telephones)

The date and time are not correct.

•

Set the date and time by system programming.

(

Date & Time [000] in 3.3.2 System

Programming)

The display is not shown well.

•

Change the Display contrast level.

(

3.1.2 Settings on the Programming Mode)

I want to distinguish the tones.

•

(

To distinguish the ringing tones for each CO,

INTERCOM, ICD Group, PDN, or SDN button (Digital
proprietary telephone only), 3.1.3 Customising the
Buttons)

The MESSAGE button light lit.

•

Another extension left you a message waiting
indication while you were on the phone or away
from your desk.

An SDN button on my extension does not
work.

•

A PDN button is not assigned on the extension
corresponding to your SDN button.

Create a PDN button on the desired extension.

(

3.1.3 Customising the Buttons)

Problem

Remedy

Summary of Contents for KX-TDE200NZ



























































































































































































































































Search results

Summary of Contents for KX-TDE200NZ

Reviews:

Related manuals for KX-TDE200NZ

Brands by name

Popular brands

Panasonic KX-TDE200NZ, User Manual

Search results

Summary of Contents for KX-TDE200NZ

Reviews:

Related manuals for KX-TDE200NZ

Brands by name

Popular brands