Panasonic KX-TDE110, Installation Manual

Page: 78 / 192

3.3 Information about the Main Processing Card
78 Installation Manual
Notes
• Make sure to use the MNT port for PC connection, and the LAN port for LAN connection.
• The maximum length of the cable to be connected to the IPCMPR card is 100 m (328 ft).
• When connecting the RJ45 connector, attach the ferrite core included with the PBX. Refer to "3.2.8
Attaching a Ferrite Core".
• For details about Virtual Slots, refer to "1.4.3 System Capacity".
• For details about the activation keys, refer to "2.1 Information about the Activation Keys".
• For details about connecting to a LAN, refer to "3.12 LAN Connection".
• For details about connecting peripherals, refer to "3.11.1 Connection of Peripherals".
• For details about System Initialize Switch, refer to "3.14.1 Starting the PBX".
• For details about Reset Button, refer to "5.1.4 Using the Reset Button".
WARNING
A LITHIUM BATTERY IS USED IN THE IPCMPR CARD. THERE IS A RISK OF EXPLOSION
IF THE BATTERY IS REPLACED WITH THE INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
CAUTION
• Use only the SD Memory Card included with the PBX.
• The SD Memory Card contains software for all the processes of the PBX and all the customer data.
It can be easily removed and taken away from the PBX by a third party. Therefore, do not allow
unauthorized access to prevent data leakage.
• The SD Memory Card must be inserted in the SD Memory Card slot of the IPCMPR card before
startup.
• Do not remove the SD Memory Card while power is supplied to the PBX. Doing so may cause the
PBX to fail to start when you try to restart the system.
• To prevent data leakage, render the SD Memory Card physically unusable before disposal.
Pin Assignments
MNT Port/LAN Port (10BASE-T/100BASE-TX)
No. Signal Name Input (I)/Output (O) Function
1 TPO+ O Transmit data+
2 TPO- O Transmit data-
3 TPI+ I Receive data+
4-5 Reserved – –
6 TPI- I Receive data-
7-8 Reserved – –
1
8