Panasonic KX-TDE110 Installation Manual Download

Page: 172 / 192

4.3 Installation of the KX-TDE Maintenance Console

172

Installation Manual

4.3

Installation of the KX-TDE Maintenance
Console

4.3.1

Installing and Starting the KX-TDE Maintenance Console

System Requirements

Required Operating System

•

Microsoft Windows 2000, Windows XP, or Windows Vista™ Business

Minimum Hardware Requirements

•

CPU: 800 MHz Intel Celeron microprocessor

•

HDD: 100 MB of available hard disk space

•

RAM: 128 MB of available RAM

Recommended Display Settings

•

Screen resolution: XGA (1024 × 768)

•

DPI setting: Normal size (96 DPI)

Installing the KX-TDE Maintenance Console

Notes

•

Make sure to install and use the latest version of the KX-TDE Maintenance Console.

•

To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP
Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.

•

To install or uninstall the software on a PC running Windows Vista Business, you must be logged
in as a user in the "Administrators" group.

Starting the KX-TDE Maintenance Console and Assigning the Basic
Items (Quick Setup)

When you start the KX-TDE Maintenance Console with the Installer Level Programmer Code and connect
to the PBX for the first time after initialization (with the factory default setting), Quick Setup will launch
automatically. During Quick Setup, you will set up the basic items. For details about the basic items, refer to
"1.14.2 Quick Setup" in the Feature Manual.

Copy the setup file of the KX-TDE Maintenance Console to your PC. (Its icon is shown here, on the left.)

Double-click the setup file to run the installer.

Follow the on-screen instructions provided by the installation wizard.

Connect the PC to the PBX with an Ethernet straight cable or RS-232C cross cable.

Start the

KX-TDE Maintenance Console

from the Start menu.

"Information before programming" appears.

Carefully read this important additional information, which includes updates to this and other
manuals.

Click

to close this window.

Summary of Contents for KX-TDE110

































































































































































































Search results

Summary of Contents for KX-TDE110

Reviews:

Related manuals for KX-TDE110

Brands by name

Popular brands

Panasonic KX-TDE110, Installation Manual

Search results

Summary of Contents for KX-TDE110

Reviews:

Related manuals for KX-TDE110

Brands by name

Popular brands