manualshive.com logo in svg

Panasonic KX-TDE100, Feature Manual

Share
Download
Panasonic KX-TDE100 Feature Manual Download Page 355

[Example]

VPS (In AA 
service mode)

PBX

Sent "#6" + "   ", "102".

Listening message
command, mailbox number

Mailbox for 
Extn. 102

Pressing the 
MESSAGE
button

Switching to VM command

Extn. 102

4.

AA Service

If the VPS transfers the call using the AA service, the PBX will inform the VPS of the status of the called
destination with the preprogrammed DTMF status signal so that the VPS can confirm the status of the
extension without listening to the system tones (e.g., ringback tone).
Assign the DTMF status signal to suit the VPS settings.

[DTMF Status Signals and Conditions]

Status

Condition

Default Command

RBT (ringback tone)

The PBX is ringing the corresponding extension.

1

BT (busy tone)

The called extension is busy.

2

ROT (reorder tone)

The dialed number is invalid.

3

DND (DND tone)

The called extension has set DND. (

®

 4.1.10  DND

(Do Not Disturb))

4

Answer

The called extension has answered the call.

5

FWD VM RBT (FWD to
Voice Mail ringback
tone)

The called extension has set FWD to VPS and the
PBX is calling another port of the VPS.

6

FWD VM BT (FWD to
Voice Mail busy tone)

The called extension has set FWD to VPS and all
ports of the VPS are busy.

7

FWD EXT RBT (FWD to
extension ringback
tone)

The PBX is calling an extension other than the one
dialed. FWD or Idle Extension Hunting (

®

 9.1.9  Idle

Extension Hunting) may be assigned by the called
extension.

8

Confirm (confirmation
tone)

The PBX receives confirmation that the feature has
been successfully set or canceled (e.g., Message
Waiting) on the extension.

9

Disconnect

The caller has hung up.

#9

5.21  [3-8-1] VM(DTMF) Group—System Settings

→

VM DTMF Status Signal—Ringback Tone

→

VM DTMF Status Signal—Busy Tone

→

VM DTMF Status Signal—Reorder Tone

→

VM DTMF Status Signal—DND Tone

Document Version  2009-12  

Feature Manual

355

19.1.5 Voice Mail DTMF Integration

Summary of Contents for KX-TDE100









































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands