Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008... Feature Manual Download Page 194 | Manualshive

Page: 194 / 366

background image

1.13 P

194

Feature Manual

[DPT + SLT]

•

When in the parallel mode, XDP mode of the Super Hybrid port should be turned off through system
programming.

•

Whether the SLT rings for incoming calls is programmable.

Ring on:

Both telephones ring when a call is received, except for when the digital proprietary telephone

(DPT) is in Hands-free Answerback mode (

→

1.8.1 Hands-free Answerback) or voice-calling mode

(Alternate Receiving Ring/Voice) (

→

1.9.13 Intercom Call).

Ring off:

Only the DPT rings when a call is received, however, the SLT can be used to answer the call.

•

Both telephones cannot engage in calls simultaneously. If one telephone goes off-hook while the other
is on a call, the call is switched to the telephone that goes off-hook. Note, however, that the call will not
be switched when the telephone is:

a)

Being monitored by another extension. (

→

1.3.4 Call Monitor)

b)

Receiving an Off-hook Call Announcement (OHCA) (

→

1.12.3 OHCA (Off-hook Call

Announcement)) or Whisper OHCA. (

→

1.20.3 Whisper OHCA)

c)

On a conference call (

→

1.3.16 Conference,

→

1.5.3 Executive Busy Override,

→

1.13.12 Privacy

Release).

d)

Using Live Call Screening (LCS) or Two-way Record is activated (

→

1.19.4 Voice Mail DPT (Digital)

Integration).

[DPT + DPT]

•

Available Telephones

KX-T7600 series, except KX-T7640

•

When Digital XDP connection enables the number of DPTs to exceed the maximum capacity that the
PBX supports, the following conditions must be met:

–

KX-TDA50: An MEC card is installed and an additional AC adaptor is connected.

–

KX-TDA100/KX-TDA200: An MEC card and the PSU-M or PSU-L is installed.

–

KX-TDA600: The PSU-L is installed.

•

The following features cannot be used on either the master or slave DPT:

a)

OHCA: A call waiting tone will be heard even if the OHCA feature is set.

b)

USB Module: The DPTs will not function properly if a USB Module is attached to either DPT. Do
not connect a USB Module to either of the DPTs.

Note

To cancel a Digital XDP connection, disconnect the slave DPT from the master, then disconnect the
and reconnect the master DPT to the PBX.

[DPT + DPT + SLT]

•

When an SLT is connected to the slave DPT in parallel mode, the SLT acts as a parallel extension of
the master DPT. If connected in XDP mode, the SLT acts as an independent extension.

Installation Manual References

KX-TDA50

1.4.3 System Capacity

2.5.6 MEC Card (KX-TDA5105)

2.6.2 Parallel Connection of the Extensions

2.6.3 Digital EXtra Device Port (Digital XDP) Connection

KX-TDA100/KX-TDA200

«
...
192
193
194
195
196
...
»

Summary of Contents for KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008...















































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008...

-295861 - Corded Desktop CID Itad

Brand: GE Pages: 44

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 289

Brand: Panasonic Pages: 60

Brand: Panasonic Pages: 68

Brand: Panasonic Pages: 36

T-Mobile KX-HDV130

Brand: Panasonic Pages: 35

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 11

Brand: Panasonic Pages: 8

KXDT346 - DIGITAL PROPRIETARY TELEPHONE

Brand: Panasonic Pages: 5

KXDT321 - DIGITAL PROPRIETARY TELEPHONE

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 24

DECT Portable Station KX-TCA256

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 18

Brand: PhoneMate Pages: 24

Brand: Uniden Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands