Panasonic KX-TDA30, Features Manual

Page: 24 / 472

1.1 Incoming Call Features
24 Feature Guide
• Inter-digit Time
When the Inter-digit time expires, the PBX stops receiving the DID/DDI number and starts to check the
DID/DDI table. (Refer to the [Programming Example of DID/DDI Table] above).
Even if the Inter-digit time does not expire, the PBX stops receiving the DID/DDI number when the
received number is found in the DID/DDI table. The PBX then routes the call to the corresponding
destination. If the received number matches several entries in the table, the call is directed to the
destination of the first matching entry.
[Example] If a call is received in Lunch mode;
Programming Manual References
PC Programming Manual
2.7.30 [1-1] Slot—DID Card Property
2.8.4 [2-3] Timers & Counters—Miscellaneous—Receiving Dial Inter-digit Timer—DDI / DID
2.16.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
→
Distribution Method
→
DDI/DID/TIE/MSN—Remove Digit
→
DDI/DID/TIE/MSN—Additional Dial
2.16.3 [10-3] DDI / DID Table
PT Programming Manual
[421] BRI DIL/DDI/MSN Selection
[451] DID Number
[452] DID Name
[453] DID Destination
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
2.2.3 Tenant Service
2.2.4 Time Service
3.1 Capacity of System Resources
Received Number Destination Explanation
123-4567 Extn. 100 The PBX finds the match in location 0001 in the table
after receiving "7". So the call is routed to extension 100.
123-456 Extn. 101 The Inter-digit time expired after receiving "6". The PBX
finds the match in location 0003 in the table. So the call
is routed to extension 101.