1.17 Optional Device Features
Feature Guide
211
–
The KX-TDA6920, KX-TDA0920 or KX-TDA3920 SD Memory Card for Software Upgrade to
Enhanced Version is required to use this feature.
–
DISA security mode should be set to No Security or Trunk Security.
–
If the called extension does not answer, is busy, or is in DND mode, the DISA Intercept feature
operates.
–
The party on hold can use the Call Retry feature.
–
End of Call Detection does not operate after dialling “#”.
–
Calls can only be transferred to extensions within the PBX.
–
Transfer Recall, Call Splitting and Call Transfer with Announcement are not available.
•
DISA Reorder Tone Duration
It is possible to set the DISA Reorder Tone Duration time. This specifies the length of time that a reorder
tone will be sent to the caller. When the timer expires, the call will be disconnected. Call Retry is
possible during the DISA Reorder Tone Duration time.
→
2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—DISA—Reorder Tone Duration
•
Call Deny
Extensions can deny DISA calls on a COS basis.
→
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Accept the Call from DISA
•
Verification Code PIN Lock/Extension PIN Lock
If the wrong PIN is entered three times, the line will be disconnected. If the wrong PIN is entered a
preprogrammed number of times successively, that extension or verification code will become locked,
and even entering the correct PIN will not unlock it. Only an extension assigned as the manager can
unlock it. In this case, the PIN will be unlocked and cleared.
→
2.8.4 [2-3] Timers & Counters—Miscellaneous—Extension PIN—Lock Counter
•
DISA Automatic Walking COS
–
The KX-TDA6920, KX-TDA0920 or KX-TDA3920 SD Memory Card for Software Upgrade to
Enhanced Version is required to use this feature.
•
Each outgoing message (OGM) can be assigned a name through system programming for
programming reference.
→
2.11.4 [5-3-2] Voice Message—DISA Message—Name
→
[731] Outgoing Message (OGM) Name
Installation Manual References
KX-TDA30
2.5.4 MSG2 Card (KX-TDA3191)
KX-TDA100/KX-TDA200
2.6.1 OPB3 Card (KX-TDA0190)
2.6.6 MSG4 Card (KX-TDA0191)
KX-TDA600
2.8.1 OPB3 Card (KX-TDA0190)
2.8.5 MSG4 Card (KX-TDA0191)
Programming Manual References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
→
DISA—Delayed Answer Timer
→
DISA—Mute & OGM Start Timer after Answering
Summary of Contents for KX-TDA30
