No.
Signal Name
Level [V]
Function
1
RX+
(+)
Receive data (+)
2
RX-
(-)
Receive data (-)
3
Reserved
-
-
4
TX-
(-)
Transmit data (-)
5
TX+
(+)
Transmit data (+)
6-8
Reserved
-
-
LED Indications
Indication
Color
Description
CARD STATUS
Green/Red
OFF: Power Off
Green ON: Normal (all ports are idle)
Green Flash (60 times per minute): Normal (a port is in use)
Red ON: Fault (includes reset)
Red Flash (60 times per minute): Out of Service
SYNC-ERR
Red
OFF: Normal
ON: Alarm
RAI
Red
OFF: Normal
ON: Alarm (Clock Slave)
Flash (60 times per minute): Alarm (Clock Master)
AIS
Red
OFF: Normal
ON: Alarm
SYNC
Green
OFF: Alarm
ON: Normal
Flash (60 times per minute): Normal (Clock Master)
Starting the Hybrid IP-PBX
CAUTION
- SD Memory Card must be inserted in the SD Memory Card slot of
the MPR card before start up.
- Before touching the System Clear Switch and the Reset Button,
discharge static by touching ground or wearing a grounding strap.
- Once you have started the Hybrid IP-PBX and if you unplug the
Hybrid IP-PBX, do not perform the following procedures to start
the Hybrid IP-PBX again. Otherwise, your programmed data is
cleared. To restart the Hybrid IP-PBX, refer to "Using the Reset
Button".
8
Summary of Contents for KX-TDA0187
