Panasonic KX-TD816 User Manual Download

Page: 295 / 388

Station Features and Operation (DPT/SLT)

User Manual

295

Recording a message

Any Telephone

Lift the handset or press
SP-PHONE/MONITOR.

Enter OGM number
(1 through 4).

Record a message.

Confirmation
tone

Press STORE or wait until
playback is finished

Confirmation
tone

Dial 361.

Hang up or press
SP-PHONE/MONITOR.

Press STORE or wait until
a maximum recording time
has elapsed.

AUTO DIAL

STORE

AUTO DIAL

STORE

The STORE indicator light turns off.

OGM no.

<PT Display Example>

Time counter
(seconds)
OGM number

selected

(1 through 4)

The STORE indicator light flashes red slowly
Recording starts after the confirmation tone.

OGM 2 Rec.:00

The recording is stopped and STORE indicator light turns steady red.
The recorded message will be played back automatically.

<PT Display Example>

OGM 2 Play:28

Summary of Contents for KX-TD816





































































































































































































































































































































































































Search results

Summary of Contents for KX-TD816

Reviews:

Related manuals for KX-TD816

Brands by name

Popular brands

Panasonic KX-TD816, User Manual

Search results

Summary of Contents for KX-TD816

Reviews:

Related manuals for KX-TD816

Brands by name

Popular brands