background image

Station Features and Operation (DPT/SLT)

User Manual

197

4.3.52

Intercom Calling

You can make a call to another extension user within the system or a tenant.

Using the handset

Using the Speakerphone

Using a DSS (Direct Station Selection) button

Conditions

Extension Number Assignment

Extension numbers are assigned to all extensions according to [003] Extension Number Set 
in the Programming Guide.

Call Progress Tone

After dialing an extension number, you will hear one of the following tones:

Ringback tone:

 Indicates the destination extension is being called.

Confirmation tone:

 Indicates you can perform voice calling (e.g., Paging).

Busy tone:

 Indicates the destination extension is busy.

Do Not Disturb (DND) tone:

 Indicates the destination extension has set the "Do Not 

Disturb (DND)" feature.

<PT>

You can assign a DSS button on a proprietary telephone (PT) or DSS Console by Station, 
User or System Programming.

Extension names can be given to all extensions by User or System Programming. An 
extension number and a name, if programmed, are shown on the display PT during an 
intercom call.

Any Telephone

extension no.

Lift the handset.

Talk.

Hang up.

Dial the extension number.

PT

extension no.

Press SP-PHONE
or INTERCOM.

Talk.

Dial the extension number.

Press SP-PHONE.

or

SP-PHONE

SP-PHONE

INTERCOM

PT

Lift the handset or press
SP-PHONE/MONITOR.

Talk.

Hang up or press
SP-PHONE/MONITOR.

Press DSS 
(flexible button). 

(DSS)

Summary of Contents for KX-TD816





































































































































































































































































































































































































Reviews: