Panasonic KX-TD816, User Manual

Page: 72 / 388

User Programming
72 User Manual
3.1.2 Programming Methods
Advancing to the next stage
When "USR-PGM NO? " is displayed, you can select one of the following:
• To go to program [000], press the
NEXT
button.
• To go to another program, enter the 3-digit program address.
Rotation of jack number
Each jack of the Digital Super Hybrid System supports the connection of a digital proprietary
telephone and a single line device with different extension numbers (eXtra Device Port: XDP
function). To program this function it is necessary to assign two parts for each jack. The first
part of jack one is 01-1. The second part of jack one is 01-2. The first part of jack two is 02-1
and so on. The
NEXT and PREV buttons can be used to move from jack to jack as required.
Example
Note
The first part of a jack is for a DPT of a XDP-assigned jack. The second part is for a single line
device. Program [600] EXtra Device Port assigns which jacks are XDP.
Entering Characters
You can enter characters to store names for speed dial numbers, extension numbers, etc., by
using the dialing key pad and buttons.
Each of the twelve dialing keys on the dialing key pad represents seven characters. Refer to
2.2.8
Station Speed Dialing Number/Name Assignment [KX-T7235/KX-T7431/KX-T7433/
KX-T7436 only].
Storing your data
Press STORE to store your data.
• The STORE indicator lights red and a confirmation tone sounds.
* Confirmation tone (one beep)
After pressing
STORE
, you will hear a beep. This informs you that storage has been
completed successfully.
* Alarm tone (three beeps)
If you hear this alarm, your entry is not valid.
#01-1
NEXT
PREV
#01-2
NEXT
PREV
#02-1 #02-2......
NEXT
PREV