Panasonic KX-TD612E User Manual Download

Page: 38 / 246

Operation

User Manual

Saving the number and redialling (Saved Number Redial)

The saved number is programmed until another number is stored.

To save

To dial

To dial automatically (Automatic Redial)

•

To cancel the Automatic Redial, go off-hook or press CO, INTERCOM, 0 through 9, ,
or # button.

•

To cancel the Automatic Redial, go off-hook or press CO, INTERCOM, 0 through 9, ,
or # button.

Customising Your Phone

•

4.1.3

Customising the Buttons

Create or re-arrange a SAVE button.

Press STORE.

Press Save.

During a conversation or while hearing a busy tone

DPT

(Save)

AUTO DIAL

STORE

Off-hook.

Press Save.

DPT

(Save)

Press SP-PHONE.

DPT

Press Save.

(Save)

SP-PHONE

Summary of Contents for KX-TD612E























































































































































































































































Search results

Summary of Contents for KX-TD612E

Reviews:

Related manuals for KX-TD612E

Brands by name

Popular brands

Panasonic KX-TD612E, User Manual

Search results

Summary of Contents for KX-TD612E

Reviews:

Related manuals for KX-TD612E

Brands by name

Popular brands