Panasonic KX-TD612E, User Manual

Page: 55 / 246

Operation
User Manual 55
Calling an external party
• *1: If you dial a wrong DISA user code, dial and try again from this point.
• If you enter a wrong DISA user code 3 times, the line will be disconnected automatically.
• In case a destination of Intercept Routing is not assigned, the call which was made by DISA
function will be disconnected automatically when it is over a programmed time period.
• If Built-in Automated Attendant service is set, you can access the desired extension
simply by pressing 1 digit number (0-9) according to the outgoing message.
• You can select either to direct a call to the pre-programmed Intercept Routing destination
or to disconnect it without respect to the pre-programmed Intercept Routing destination
(default: direct the call to the pre-programmed Intercept Routing destination) when a caller
dials nothing for the pre-determined period of time (default: 5 s later) after hearing DISA
OGM. System Programming is required. Consult your dealer.
In Non Security Mode
Any Outside Telephone
Enter line
access number
(9 or 81-84).
line access
no.
Enter DISA
phone number.
DISA
phone no.
phone no.
Enter phone
number of the
external party.
DISA OGM
D.Tone
Enter line
access number
(9 or 81-84).
line access
no.
DISA user
code
Enter DISA
phone number.
DISA
phone no.
phone no.
In Trunk Security Mode
Enter phone
number of the
external party.
Enter pre-assigned
DISA user code
(4-10 digits).
DISA OGM D.Tone
Enter DISA
phone number.
DISA
phone no.
phone no.
In All Security Mode
Enter phone
number of the
external party.
DISA OGM D.Tone
DISA user
code
Enter pre-assigned
DISA user code
(4-10 digits).
Enter line
access number
(9 or 81-84).
line access
no.
1
1
D.Tone
D.Tone