Panasonic KX-TD612E Page 238 User Manual Download

Page: 238 / 246

Appendix

238

User Manual

When you make calls

Tone 2

At least one feature has been
changed from the default
setting at your extension
(except for the Doorphone Call
Forwarding to CO Line
feature).

Tone 3

•

The alarm is being
answered.

•

Enter an account code to
turn off the tone.

Tone 4

Message Waiting is on.

Tone 5

A Voice Message was
received.

Tone 6

The rest of recording time
becomes less than 5 minutes.

Busy Tone

CCBS Tone

•

The called party on an
ISDN line is busy

Reorder Tone

•

The outside line you tried
to seize is not assigned or
denied.

•

The wrong account code
was entered.

1 s

Summary of Contents for KX-TD612E























































































































































































































































Search results

Summary of Contents for KX-TD612E

Reviews:

Related manuals for KX-TD612E

Brands by name

Popular brands

Panasonic KX-TD612E, User Manual

Search results

Summary of Contents for KX-TD612E

Reviews:

Related manuals for KX-TD612E

Brands by name

Popular brands