Panasonic KX-TD500CE, User Manual

Page: 19 / 280

2.1 Before Operating the Telephones
Operation
19
When You Use a Panasonic Proprietary Telephone
When you use a Panasonic proprietary telephone and the DSS Console, they may have some of the
useful function buttons listed below. These buttons make operations simple. The illustrations may
differ from the buttons on your telephone.
Used to answer an incoming call. Call Forwarding / Do Not Disturb:
Used to perform Call Forwarding or Do
Not Disturb.
Used to receive an incoming intercom
call in the hands-free mode or mute the
microphone during a conversation. Used to place a call on hold.
Used for System Speed Dialling or
storing programme changes. Used to make or receive an intercom
call.
CO: Used to make or receive an
outside call. A Loop-CO button
supports all lines. Pressing this button
seizes an idle line automatically.
(Button assignment is required.) (Only
the CO "number" (e.g. 1, 2) may be
shown on some telephones.) Jog Dial: Used to adjust the volume
and the display contrast or select
desired items for each function.
Conference: Used to establish a three-
party conversation. Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
DSS: Used to access the extension.
(Only the "S" may be shown on some
telephones.) Used for hands-free dialling. You can
monitor the party's voice hands-free.
Used to send a flash signal to the
Central Office or another connected
PBX. Or used to disconnect the current
call and make another call without
hanging up. Used to insert a pause during dialling.
Used as the PROGRAM button if it is
not equipped.
Function: Located beside the display .
Used to perform the displayed function
or operation.
PDN: Used to make or receive an
intercom / outside call. This button can
also be used to set / cancel various
features available for the extension.
(CO)
(DSS)
(PDN)