Panasonic KX-TD500CE, User Manual

Page: 213 / 280

4.3 Customising Your System (User Programming)
Customising Your Phone & System
213
4.3 Customising Your System (User
Programming)
You can customise your system according to your application.
Your system already has default settings (factory installed). Most of the programming is done by your
dealer. Consult your dealer about system applications and re-programming according to your needs.
If you would like to assign / change the following features, extensions which meet certain conditions
can re-programme them at any time by entering the User Programming mode.*
The available programming items are shown below. (Programme number)
• 4.3.1 Date and Time Set (000)
• 4.3.2 System Speed Dialling Number Set (001)
• 4.3.3 System Speed Dialling Name Set (002)
• 4.3.4 Extension Name Set (004)
• 4.3.5 Flexible CO Button Assignment (005)
• 4.3.6 Caller ID Dial Set (006)
• 4.3.7 Caller ID Name Set (007)
• 4.3.8 Absent Messages Set (008)
• 4.3.9 Quick Dial Number Set (009)
Required Telephone
A Panasonic Proprietary Telephone with display (e.g. KX-T7533, KX-T7536)
User Password
To enter the programming mode, a user password (4-7digits) is required. It should be programmed
by System Programming beforehand. Check pre-programmed password (Default:1234).
Conditions
Only one extension, which is on-hook and holding no calls, is available for performing user
programming at one time. If another extension is programming, "
Another Use
" is displayed.
List
Before programming, decide your selections and write them down in the list for each programming
item. These are useful for easy programming and future reference. Your dealer also has programming
tables which contain all of the assignments. You may ask for photo copies of these tables to be aware
of the features / conditions available.
* PROGRAM button is used to enter / exit the Station Programming mode. If PROGRAM button is
not provided on your PT, please use PAUSE button instead of PROGRAM button.