Station Programming
96
User Manual
2.2.14
Ringing Tone Selection for INTERCOM Button
Allows you to assign a ringer frequency to the INTERCOM button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
•
The default is Ringing Tone Type 3.
The display shows the current
status
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.
<DPT Display Example>
(-x:tone type number)
If you want to change the tone type, enter another tone type
number.
Tone Type-X
DPT
Press
INTERCOM
.
Press
STORE
.
Press
INTERCOM
again.
Enter the tone type number
(1 through 8).
tone type no.
INTERCOM
INTERCOM
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
Summary of Contents for KX-TD500
