Panasonic KX-TD500 User Manual Download

Page: 228 / 554

Station Features and Operation (PT/SLT)

228

User Manual

4.3.22

Conference, 5-Party

A PT user can originate a 5-party conference call which includes outside or inside parties or
both in any combination.

To establish a 5-party conference

Dial

<PT Display Example>

Repeat these steps

Dial extension/phone number
of the other party

extension / phone no.

You must dial a line access code (9 or 801
through 848) as the leading digit(s) when
calling an outside party.

Conference Start

Lift the handset or press
SP-PHONE/MONITOR.

Dial tone

The CONF indicator light begins to flash slowly in red.
The INTERCOM or DN indicator light turns green.

Talk to the
other party.

CONF

Press CONF.

The call is parked in the idle parking zone
with the smallest zone number.

CONF

Press CONF.

Confirmation
tone

All the calls you parked are retrieved from
the parking zones.

A 5-party
conference
is now established.

Summary of Contents for KX-TD500











































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands

Panasonic KX-TD500, User Manual

Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands