Station Features and Operation (PT/SLT)
User Manual
405
Conditions
•
The telephone type (PT, SLT, OPX) must be the same at the source and destination.
•
Walking Station is not available in the following cases:
— If the extension is connected to a DHLC card (KX-TD50170).
— If the extension is connected to a HLC card (KX-T96170) in parallel.
— If the extension is in hands-free mode.
•
The status of the port must be INS (In-Service) at the source and destination.
•
When the destination extension is in one of the following states,
is
shown on the display.
— Off-hook, incoming call
— Call Hold
— All buttons on PT are in use
•
When you reset the system during this process, the setting is canceled.
Programming Guide References
•
2.3 Numbering Plan
– Walking Station
Features Guide References
1.3 System Features
•
Walking Station
User Manual References
None
Try Again
Summary of Contents for KX-TD500
