4.6
CO Line Programming
ISDN Extension Multiple Subscriber Number
429
25
Description
Selects whether the Multiple Subscriber Number is allocated to
each terminal equipment on ISDN S0 bus or not on ISDN port
basis.
Selection
• Port number: KX-TD816—01 through 06,
(
=all ports)
KX-TD1232—01 through 12,
(
=all ports)
• Enable / Disable (no number)
Default
All ports – Disable
Programming
1.
Enter 429.
Display: MSN Service
2.
Press NEXT.
Display: Port NO?–>
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #01:Disable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master
System and 07 through 12 are for the Slave, if available.
• To assign all ports to one selection, press the
key at step 3. In this
case, the display shows the contents programmed for a first port.
• You must assign the extension number to an ISDN terminal beforehand.
For details, refer to your terminal’s manual.
Feature References
None
Summary of Contents for KX-TD1232RU
