manualshive.com logo in svg

Panasonic KX-TD1232JT, User Manual

Share
Download
Panasonic KX-TD1232JT User Manual Download Page 220

6.1

Troubleshooting

220

Appendix

 Troubleshooting for DECT Portable Station

Problem

Remedy

The PS does not work.

•

The battery is empty.

 Charge the batteries fully. (

 5.2.1

Before Operating 

the DECT Portable Station Battery Charge)

•

The PS has been cancelled or the PS has not been 
registered.

 Consult your dealer.

The PS does not operate.

•

The power switch is OFF.

 Turn it ON. (

 5.2.1

Before Operating the DECT 

Portable Station Button Descriptions)

The PS does not ring.

•

Ringer volume is set to OFF or VIBRATION.

 Set to ring by pressing the Volume Control button. (

 

5.2.1

Before Operating the DECT Portable Station 

Button Descriptions)

•

The PS is out of range or the Cell Station (CS) is busy.

 Move closer to the CS or try again later.

•

The radio channel is busy or a radio communication 
error occurred.

 Try again later.

You cannot dial.

•

The number which you dialled is restricted by the 
system. 

 Consult your dealer.

•

The key lock mode is set.

 To cancel the mode, press the Function for about 2 

seconds. (

 5.3.8

Locking the Keypads)

•

The radio channel is busy or a radio communication 
error occurred.

 Try again later.

Static, sound cuts in/out, fades.
Interference from other electrical 
units.

 Set the PS and CS away from other electrical 

appliances.

 Move closer to the CS.

"CS Busy" is displayed.

•

The radio channel is busy.

 Try again later.

"FAULT" is displayed.

 Consult your dealer.

Summary of Contents for KX-TD1232JT



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands