manualshive.com logo in svg

Panasonic KX-TD1232JT, User Manual

Share
Download
Panasonic KX-TD1232JT User Manual Download Page 175

5.2

Before Operating the DECT Portable Station

DECT Portable Station

175

 Battery Charge

You need to charge the battery before initial use and when the battery strength becomes low. When 

"

" flashes or beep tones sound every five seconds during a conversation or "

BATTERY EMPTY

" 

is displayed, recharge the battery or replace with a fully charged optional spare battery. If not, the call 
will be automatically disconnected in three minutes.

Standard Battery Life
If your Panasonic battery is fully charged [provided 25°C]:

While in use (Talk mode)

Up to about 10 hours

While not in use (Stand-by mode)

Up to about 100 hours

Shows the strength of the receiving 
radio signal from the Cell Station (CS).

Strong

Weak

[Display: 

NO SERVICE

]

Out of range.
Move closer to the CS.

Shows the strength of the battery.

Fully charged.

Low

Medium

The battery needs to 
be charged.  The call 
will be disconnected 
within 3 minute after 
a beep tone sounds.

(Flashing)

(Flashing)

(Radio Signal Strength)

(Battery Strength)

(Off-hook status)

(Function mode)

(Directory or Programming mode)

(Message Waiting indicator)

Someone is waiting for your call.

Summary of Contents for KX-TD1232JT



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands