Panasonic KX-TD1232JT User Manual Download Page 197

Page: 197 / 242

5.3

Operation

DECT Portable Station

197

5.3.9

Selecting the Feature Button on the Display

The following buttons can be activated using display operations.

PAUSE Button
FWD/DND Button
MESSAGE Button
CONF (Conference) Button
TONE Button

<Example>
To cancel the Do Not Disturb feature

•

These buttons can also be activated using a combination of buttons. For descriptions and
button combinations, refer to 5.2.1

Before Operating the DECT Portable Station – Button

Descriptions.

KEY

PAUSE (KEY1)

FWD/DND (KEY2)

MESSAGE (KEY3)

CONF (KEY4)

PAUSE Button

FWD/DND Button

CONF (Conference)
Button

MESSAGE Button

Display sequence in “KEY” display

Press CANCEL.

Press
FUNCTION.

Press OK.

Press BOOK until
“FWD/DND” is
displayed.

Press 0.

Press
TALK.

Summary of Contents for KX-TD1232JT



















































































































































































































































Search results

Summary of Contents for KX-TD1232JT

Reviews:

Brands by name

Popular brands

Panasonic KX-TD1232JT, User Manual

Search results

Summary of Contents for KX-TD1232JT

Reviews:

Brands by name

Popular brands