Panasonic KX-TCD965EC Operating Instructions Manual Download Page 31

Page: 31 / 84

Chapter 2

Cordless T

elephone (Basic Operations)

Press

until the arrow points to

“

Caller ID

”.

Press

•

The most recent caller’s information is
displayed.

Press

until the desired caller

number is displayed, then press

Press

until the arrow points to

“

Edit For Call

”.

Press

S a v e P h o n e b o o k

E d i t F o r C a l l
C l e a r

Press

until the arrow points to

“

Caller ID

”.

Press

•

The most recent caller’s information is
displayed.

Press

until the desired caller

number is displayed.

Calling Back from the Caller List

Press

•

The displayed phone number is dialled
automatically.

To hang up, press

or place the

handset on the base unit.

•

The handset will return to the stand-by
mode.

•

If a phone number is not displayed in the caller
information, you cannot call back that caller.

Add a number to the current number.

•

Pressing

erases the digit to the

left of the cursor. To erase all digits,
press

firmly.

To call back, press

OR
To store the number in the phonebook,
press

. Then while “

Save

Phonebook

” is at the arrow, press

and follow the instructions on the

display (see page 32, from step 7).

Editing the Caller’s Phone Number

You can edit a phone number in the Caller List. After editing the number, you can continue with calling
back or phonebook storing procedures.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.

KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 31

Summary of Contents for KX-TCD965EC





















































































Search results

Summary of Contents for KX-TCD965EC

Reviews:

Related manuals for KX-TCD965EC

Brands by name

Popular brands

Panasonic KX-TCD965EC, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD965EC

Reviews:

Related manuals for KX-TCD965EC

Brands by name

Popular brands