Panasonic KX-TC1230ALW, KX-TC1230NZW Page 18 Operating Instructions Manual Download

Page: 18 / 84

Programmable Functions

LCD contrast

Set recall

Talk switching

Set area code

TAD program

You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode initially.

During programming:
*To select a desired function item, press

repeatedly until the

arrow points to the item. Then press

to go to the next step.

•

You can exit the programming mode any time by pressing

(EXIT/CH)

•

If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.

•

If the handset has lost communication with the base unit, 3 beeps sound and “

link to base Place on cradle and try again.

” is displayed.

Lift the handset, and press

(FUNCTION/EDIT)

<Function menu>*

To store an item in the directory (p. 45).

To select the ringer volume (p. 20).

Press

To select the LCD contrast (p. 21).

To select the recall time (p. 56).

To set the auto talk feature (p. 19).

To set your area code (p. 22).

To program answering system functions (p. 25).

Save directory

Ringer volume

Program

<Function menu>*

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW





















































































Search results

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW

Reviews:

Related manuals for KX-TC1230ALW, KX-TC1230NZW

Brands by name

Popular brands

Panasonic KX-TC1230ALW, KX-TC1230NZW, Operating Instructions Manual

Search results

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW

Reviews:

Related manuals for KX-TC1230ALW, KX-TC1230NZW

Brands by name

Popular brands