Panasonic KX-TC1230ALW, KX-TC1230NZW Page 71 Operating Instructions Manual Download

Page: 71 / 84

Answering System

Direct commands

NEW MESSAGE
PLAYBACK

ALL MESSAGE
PLAYBACK

REPEAT
(During playback)

SKIP
(During playback)

STOP

ERASING A
SPECIFIC
MESSAGE
(During playback)

ERASING ALL
MESSAGES

PAGER CALL
ON/OFF

ANSWERING
SYSTEM OFF

ANSWERING
SYSTEM ON

(4)

(5)

(1)

(2)

(9)

(*) (4)

(*) (5)

•

Only new messages are played back.

•

All messages are played back.

•

The current message is repeated.

•

You can also press

to repeat a

message.

•

The current message is skipped.
The next message is played.

•

You can also press

to skip a

message.

•

Operation is stopped temporarily.

•

To resume operation, enter a direct
command within 15 seconds, or the
voice menu will start (p. 70).

•

The current message is erased.

•

A short beep will sound and the next
message will be played.

•

All recorded messages are erased.

•

A long beep sounds and “

No messages

” is

heard.

•

“

Answer off

” is heard and the answering

system is turned off.

•

“

Answer set

” is heard and the answering

system is turned on.

(0)

(8)

(3)

•

Each time you press

(3),

the mode will

turn on or off.

•

If you have not stored a pager number,

“

”

will not be displayed on the

base unit, and the mode will not turn on.

PAGER

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW





















































































Search results

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW

Reviews:

Related manuals for KX-TC1230ALW, KX-TC1230NZW

Brands by name

Popular brands

Panasonic KX-TC1230ALW, KX-TC1230NZW, Operating Instructions Manual

Search results

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW

Reviews:

Related manuals for KX-TC1230ALW, KX-TC1230NZW

Brands by name

Popular brands