Panasonic KX-TC1230ALW, KX-TC1230NZW Page 79 Operating Instructions Manual Download

Page: 79 / 84

Useful Information

General

Problem

The unit does not work.

You cannot program items,
such as the day and time
adjustment.

Remedy

•

Check the settings (p. 13–17).

•

Charge the battery fully (p. 14).

•

Clean the charge contacts and charge
again (p. 15).

•

Install the battery properly (p. 74).

•

Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.

•

Re-install the battery and place the
handset on the base unit (p. 74). Try
again.

•

KX-TC1230ALW and KX-TC1230NZW
are not designed to be used with rotary
(pulse dialling) services.

•

Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory
list, or while the answering system is in
use.

•

Do not pause for over 60 seconds while
programming.

•

Move closer to the base unit.

•

Make sure that the unit is in the standby
mode.

Problem

During playback, the unit
starts to ring and stops
playback.

The handset does not
display the phone number
of the caller whose
message is being played.

Remedy

•

To answer the call, press

(DIGITAL!SP-PHONE)

or press

(TALK)

To resume playback, press

(NEW!MESSAGE)

after hanging up.

•

Place the handset on the base unit
correctly (p. 59).

•

If the caller is not stored in the Caller
List, the handset will not display the
caller’s information.

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW





















































































Search results

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW

Reviews:

Related manuals for KX-TC1230ALW, KX-TC1230NZW

Brands by name

Popular brands

Panasonic KX-TC1230ALW, KX-TC1230NZW, Operating Instructions Manual

Search results

Summary of Contents for KX-TC1230ALW, KX-TC1230NZW

Reviews:

Related manuals for KX-TC1230ALW, KX-TC1230NZW

Brands by name

Popular brands