Panasonic KX-TA82483 - Expansion Cards, Programming Manual

Page: 69 / 234

2.2 PT Programming—Procedures
Programming Manual 69
d.
Parity Bit : Parity bit indicates what type of parity is used to detect errors in the string of bits
composing a character. Make an appropriate selection depending on the requirements of the PC
or printer.
e.
Stop Bit Length : Stop bit indicates the end of a bit string that composes a character. Select an
appropriate value depending on the requirements of the PC or printer.
Conditions
• * Select "None" when the printer does not require error checking.
• The following combinations are invalid.
If any of the above invalid combinations are selected, an alarm tone will be heard.
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
[801] SMDR Parameter
Specifies the following SMDR format parameters in order to match the paper size being used by the printer:
a.
Page Length : determines the number of lines per page.
b.
Skip Perforation : determines the number of lines to be skipped at the end of every page.
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
Parity Word length Stop bit length
Mark 8 2
Space 8 1
Space 8 2
8 0 0
NEXT
( CR+LF/CR) (1200/2400/
4800/ 9600 B)
(Mark/Space/
Even/Odd/
None*)
( 1 bit/2 bits) (7/ 8 bits)
END
SELECT STORE NEXT SELECT STORE
NEXT SELECT STORE NEXT SELECT STORE NEXT SELECT STORE
<Select the new line code> <Select the baud rate>
<Select the parity bit> <Select the word length> <Select the stop bit length>
CR: Carriage Return
LF: Line Feed
8 0 1
NEXT
page length
(4…99 lines)
(0…95 lines)
END
STORE
NEXT
skip perforation
STORE
<Select the page length>
<Select the skip perforation>
66 lines
0 line