manualshive.com logo in svg

Panasonic kx-ta6246, Operating Instructions Manual

Share
Download
Panasonic kx-ta6246 Operating Instructions Manual Download Page 84

1.7

Useful Features

1-74

Operations

• The Day/Night/Lunch mode is automatically switched at a predetermined time

(default: 9:00 a.m. for every day, 5:30 p.m. for every night), if the automatic mode is
selected.

• 1.8 Operator/Manager Service Features, “Time(Day/Night/Lunch) Service Setting”
• See the Installation Manual, Section 3, “Time (Day/Night/Lunch) Service”.

This system supports the Day, Night and Lunch modes. The system operation for originating
and receiving calls can be different in the day, night and lunch modes. “Time Service” can
only be set by the operator and manager. For a PT user, even if your extension is not assigned
as the operator or manager, you can use your display to check the current mode.

Confirming the current mode (with a display PT only)

PT

Press #.

When the telephone is idle

#

• The display shows the current mode for 3 seconds.

!

!

☞

Time (Day/Night/Lunch) Service

PSQX1709ZA-05.QX  99.10.15 9:58 AM  Page 74

Summary of Contents for kx-ta6246








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands