manualshive.com logo in svg

Panasonic kx-ta6246, Operating Instructions Manual

Share
Download
Panasonic kx-ta6246 Operating Instructions Manual Download Page 46

1.4

Receiving Calls

1-36

Operations

Picking up a Call Ringing at Another Extension (Call Pickup)

• Doorphone calls can be picked up by extensions that are not programmed to answer

doorphone calls.

• You hear a confirmation tone when the call is picked up. The tone can be disabled.
• If a ringing extension sets the Call Pickup Deny feature, you will hear a reorder tone.

• 1.4 Receiving Calls, “Picking up a Call Ringing at Another Extension (Call Pickup)”,

Denying/allowing your calls to be picked up (Call Pickup Deny)

• See the Installation Manual, Section 3, “Call Pickup”.

Directed Call Pickup

Allows you to answer an incoming call ringing at any other extension.

Any telephone

Enter the extension number 
where the call is ringing.

Dial 4.

extension no.

4

Lift the handset or press 
SP-PHONE/MONITOR.

Confirmation tone 
(optional)

Talk.

!

!

☞

Group Call Pickup

Allows you to answer a call that is ringing at another telephone within your extension group.

Any telephone

Dial 40.

4

0

Lift the handset or press 
SP-PHONE/MONITOR.

Confirmation tone 
(optional)

Talk.

• You can pick up an incoming outside, intercom or doorphone call, but you cannot pickup a

Camp-On recall or hold recall.

• You will hear a confirmation tone when the call is picked up. The tone can be disabled.
• If a ringing extension sets the Call Pickup Deny feature, you will hear reorder tone.
• You can pick up a call just by going off-hook even though your extension is not ringing. 

It can be done by System Programming.

• 1.4 Receiving Calls, “Picking up a Call Ringing at Another Extension (Call Pickup)”,

Denying/allowing your calls to be picked up (Call Pickup Deny)

• See the Installation Manual, Section 3, “Extension Group”.
• See the Installation Manual, Section 3, “Call Pickup”.

!

!

☞

PSQX1709ZA-04.QX  99.10.15 9:57 AM  Page 36

Summary of Contents for kx-ta6246








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands