manualshive.com logo in svg

Panasonic kx-ta6246, Operating Instructions Manual

Share
Download
Panasonic kx-ta6246 Operating Instructions Manual Download Page 74

1.7

Useful Features

1-64

Operations

• System programming is required to execute this feature.

• Up to 2 exchange lines can join a conference.

• When a 5-party conference is changed to a 4-party conference, a confirmation tone is sent to

all parties. The tone can be disabled.

• A 3-party conference between 3 extensions cannot be changed to a 5-party conference. (The

HOLD button cannot be used.)

• When a 5-party conference is established, a confirmation tone is sent to all parties. The tone

can be disabled.

• More than one 5-party conference cannot be established at the same time.

• The Unattended Conference and Executive Busy Override features are not available during a 

5-party conference.

• During a 5-party conference, the Call Park feature cannot be used by another extension.

• If parked calls are not retrieved within 5 minutes during a 5-party conference, ringing or an

alarm tone will be heard (Call Park Recall).

• When the extension who started the 5-party conference goes on-hook, the 5-party

conference is terminated.

• When an incoming call is received, a Call Waiting tone is heard. You can answer the call

after leaving the conference by going off-hook.

• This feature cannot be used with a single line telephone.

• 1.3 Making Calls, “Interrupting an Existing Call (Executive Busy Override)”
• 1.5 During a Conversation, “Call Waiting”
• 1.7 Useful Features, “Conference (3-party)”
• 1.7 Useful Features, “Conference, Unattended”
• See the Installation Manual, Section 3, “Conference (5-party)”.

SLT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

☞

!

!

PSQX1709ZA-05.QX  99.10.15 9:58 AM  Page 64

Summary of Contents for kx-ta6246








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands