manualshive.com logo in svg

Panasonic kx-ta6246, Operating Instructions Manual

Share
Download
Panasonic kx-ta6246 Operating Instructions Manual Download Page 51

1.5

During a Conversation

Operations

1-41

Basic Operations

Placing a Call in System Parking Area (Call Park)

Allows you to place a held call into a system parking area so that you can perform other tasks.
The parked call can be retrieved by any extension user. Up to 10 calls can be parked.

PT and SLT

For a PT: Press HOLD.
For an SLT: Press Recall.

Dial 36.

6

3

Confirmation tone 
and dial tone

Confirmation tone 
and dial tone

Enter a parking zone number 
(0 through 9).

parking zone no.

During a conversation

HOLD

For an SLT

For a PT

R

•

If you hear a busy tone, it indicates the specified parking zone is
unavailable.

• You do not need to redial the feature number to change the parking

zone. Just enter the parking zone number while hearing the busy tone.

PT and SLT

Confirmation tone 
and dial tone

Dial 56.

Enter a parking zone number 
(0 through 9) where the call 
is to be parked.

5

6

parking zone no.

Lift the handset or press 
SP-PHONE/MONITOR.

You can talk 
to the party.

• If there is no held call, you will hear a reorder tone.

Retrieving a parked call

• If a parked call is not retrieved within a pre-determined time (default: 30 seconds), ringing

will be heard (Hold Recall).

• If a parked call is not retrieved within 30 minutes, it will be automatically disconnected.
• This feature is useful when you want to hold more than one intercom call with a PT, or

more than one intercom or outside call with an SLT.

• During a 5-party conference, you cannot use this feature.

• 1.7 Useful Features, “Conference (5-party)”
• See the Installation Manual, Section 3, “Call Park”.

PT

!

!

☞

PSQX1709ZA-04.QX  99.10.15 9:57 AM  Page 41

Summary of Contents for kx-ta6246








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands