KX-TA Advanced Hybrid System
E&OE Issue 2
7
System Components
KX-TA624E Central Control Unit
The central control unit is initially configured 3 exchange lines and 8 extension ports.
The following devices are built in:
1. Music input
2. Paging output
3. RS232C call logging port
4. Ring generator
5. DTMF receivers
6. All system control
KX-TA62474E Expansion Card
Expansion card for the connection of up to 3 exchange lines and 8 telephones. All
ports on this module will support the 7000 series and single line telephones.
Note: Only one of these cards may be fitted onto each KX-TA624E.
KX-TA62477E Expansion Card
Expansion card to allow connection of 8 single line telephones.
Note: Only one of these cards may be fitted onto each KX-TA624E.
KX-TA62491E DISA/OGM/Fax Detection Card
Interface card to provide Direct Inward System Access (DISA) with two user
recorded messages. The messages may be used with the DISA or UCD (Uniform Call
Distribution) features. If fax tone is detected the incoming fax call will be
automatically transferred to the nominated fax extension.
Each cabinet will allow one card to be installed.
KX-TA62493E Caller ID Card
Interface card to allow connection of 8 PSTN or equivalent lines.
Each 3 exchange lines will require one Caller ID Card. For example a basic system
will require one Caller ID card, when a KX-TA62474E expnasion card is fitted an
additional caller ID card will be requred.
KX-TA62460E Doorphone / Door Opener Card
Interface to allow connection of 4 Doorphones and 4 door release mechanisms.
Only one of these cards may be fitted onto each system.