Panasonic KX-P7110 Maintenance Manual Download Page 38

Page: 38 / 122

Setting the Printer Driver

Macintosh

Parts

Windows

It is possible to set the printer by using the printer properties window. It can be displayed from

Windows*

(see below) or from an application (

see page 40

■

Setting the Printer from Windows:

When setting the printer by using printer properties window under Windows, the setting is
retained even if Windows is shutdown and restarted.

Click

, move the pointer to Settings, then click Printers.

The Printers window is displayed.

Click the Panasonic KX-P7105 PCL6 or Panasonic KX-P7110 PCL6
icon.

Click the File menu, then click the following menu depending on the
operating system.

- Properties (Windows 95 / Windows 98 / Windows Me)
- Document Default... (Windows NT 4.0 )
- Printing Preferences... (Windows 2000 ).
The printer

properties

window is displayed.

Microsoft® Windows® operating system (hereafter Windows)

Setting the Printer Driver

Displaying the Printer Properties Window

Start

Summary of Contents for KX-P7110



























































































































Search results

Summary of Contents for KX-P7110

Reviews:

Related manuals for KX-P7110

Brands by name

Popular brands

Panasonic KX-P7110, Maintenance Manual

Search results

Summary of Contents for KX-P7110

Reviews:

Related manuals for KX-P7110

Brands by name

Popular brands