Panasonic KX-NCP500 Installation Manual Download

Page: 23 / 142

1.2 Optional Equipment

1.2.1 Optional Equipment

Model No.

Model Name

Description

KX-NCP1104

4-Channel VoIP DSP Card (DSP4)

4-channel digital signal processor card with a
4-Channel IP Trunk activation key and an
8-Channel IP Proprietary Telephone activation
key preinstalled. Compliant with ITU-T G.729A
and G.711 codec methods. To be mounted on
the IPCMPR card.

KX-NCP1170

4-Port Digital Hybrid Extension
Card (DHLC4)

4-port digital hybrid extension card for DPTs,
APTs, SLTs, DSS consoles, and PT-interface
CSs, with 1 power failure transfer (PFT) port.

KX-NCP1171

8-Port Digital Extension Card
(DLC8)

8-port digital extension card for DPTs, DSS
consoles, and PT-interface CSs.

KX-NCP1172

16-Port Digital Extension Card
(DLC16)

16-port digital extension card for DPTs, DSS
consoles, and PT-interface CSs.

KX-NCP1173

8-Port Single Line Telephone
Extension Card (SLC8)

8-Port Single Line Telephone Extension Card
(SLC8)

KX-NCP1174

16-Port Single Line Telephone
Extension Card (SLC16)

16-Port Single Line Telephone Extension Card
(SLC16)

KX-NCP1180

4-Port Analog Trunk Card
(LCOT4)

4-port analog CO line card with 1 power failure
transfer (PFT) port.

KX-NCP1187

T-1 Trunk Card (T1)

1-port T1 CO line card. EIA/TIA standard
compliant.

KX-NCP1190

Optional 3-Slot Base Card (OPB3)

Optional 3-slot base card for mounting a
maximum of 3 option cards.

KX-NCP1290

PRI Card (PRI23)

1-port ISDN Primary Rate Interface card (23B
channels). NI (North American standard ISDN
protocol) compliant.

KX-TDA0161

4-Port Doorphone Card (DPH4)

4-port doorphone card for 4 doorphones and 4
door openers. To be mounted on the OPB3 card.

KX-TDA0164

4-Port External Input/Output Card
(EIO4)

4-port external input/output card. To be mounted
on the OPB3 card.

KX-TDA0166

16-Channel Echo Canceller Card
(ECHO16)

16-channel card for echo cancellation during
conferences. To be mounted on the OPB3 card.

KX-TDA0191

4-Channel Message Card (MSG4)

4-channel message card. To be mounted on the
OPB3 card.

KX-TDA0194

4-Channel Simplified Voice
Message Card (ESVM4)

4-channel simplified voice message card for
Simplified Voice Message feature. Also supports
MSG card features. To be mounted on the
OPB3 card.

Document Version 2011-10

Installation Manual

1.2.1 Optional Equipment

Summary of Contents for KX-NCP500















































































































































Search results

Summary of Contents for KX-NCP500

Reviews:

Related manuals for KX-NCP500

Brands by name

Popular brands

Panasonic KX-NCP500, Installation Manual

Search results

Summary of Contents for KX-NCP500

Reviews:

Related manuals for KX-NCP500

Brands by name

Popular brands