Panasonic KX-NCP1000 Operating Manual Download | Manualshive

Page: 8 / 236

background image

[For KX-NCP Series PBX Users Only]

•

Only use the 19-inch rack mounting equipment (attachment bracket, screws) included with the PBX.

[For KX-TDE Series PBX Users Only]

•

Do not dispose of batteries in a fire, as they may explode. Dispose according to local regulations.

CAUTION

SAFETY REQUIREMENTS

For All Telephone Equipment

•

Unplug the product from the wall outlet before cleaning. Wipe the product with a soft cloth. Do not clean
with abrasive powders or with chemical agents such as benzine or thinner. Do not use liquid cleaners or
aerosol cleaners.

•

The product should be kept free of dust, moisture, high temperature (more than 40 °C [104 °F]), and
vibration, and should not be exposed to direct sunlight.

For the PBX

•

When relocating the equipment, first disconnect the telecom connection before disconnecting the power
connection. When the unit is installed in the new location, reconnect the power first, and then reconnect
the telecom connection.

•

The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near
the equipment and is easily accessible.

•

Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect it
from overheating, these openings must not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface while in use. The product should never
be placed near or over a radiator or other heat source. This product should not be placed in a sealed
environment unless proper ventilation is provided.

•

When this product is no longer in use, make sure to detach it from the rack (for KX-NCP series PBXs)/wall
(for KX-TDE series PBXs).

•

To protect this unit from static electricity, do not touch any external connectors of the unit.

[For KX-NCP Series PBX Users Only]

•

To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG) UL Listed or CSA Certified
Telecommunication Line Cord.

SECURITY REQUIREMENTS

In order to use the PBX safely and correctly the Security Requirements below must be observed. Failure to do
so may result in:

•

Loss, leakage, falsification or theft of user information.

•

Illegal use of the PBX by a third party.

•

Interference or suspension of service caused by a third party.

What is User Information?

User Information is defined as:

1.

Information stored on the SD Memory Card:
Phonebook data, user IDs, system settings data, passwords (User/Administrator/Installer), Personal
Identification Numbers (PINs), etc.

2.

Information sent from the PBX to a PC or other external device:

8

Operating Manual

Document Version 2013-05

Important Information

«
...
6
7
8
9
10
...
»

Summary of Contents for KX-NCP1000













































































































































































































































Reviews:

No comments

Related manuals for KX-NCP1000

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands