Panasonic KX-NCP1000 Operating Manual Download

Page: 58 / 236

During a conversation

SLT

Press

Recall/hookswitch

To disconnect one party and then talk to the other in a three-party conversation

PT/PS

Press

TRANSFER

once

or twice to establish a
conversation with the
party to be disconnected.

TRANSFER

During a conversation

Press

FLASH/RECALL

FLASH/

RECALL

Talk.

The other party will be put on hold.

Press flashing

ICD Group

PDN

SDN

, or

INTERCOM

corresponding to the original party.

INTERCOM

(CO)

(ICD Group)

(SDN)

(PDN)

•

* In this case, the FLASH/RECALL button on a proprietary telephone must be set to
Flash/Recall mode through system programming.

•

During a three-party conversation, pressing the TRANSFER button or Recall/
hookswitch alternates between the two other parties in the conversation.

•

You can have a conference with a maximum of eight parties (comprising intercom or
CO lines) simultaneously.

•

During a conversation involving four or more parties, you cannot disconnect one party
and maintain the conversation with the other parties.

•

SIP Extensions cannot originate a conference call, but can be added as a member.

Customizing Your Phone

•

3.1.4 Customizing the Buttons
Create or edit a Conference button.

Leaving Three-party Conference

The person who originated a conference with two other parties can leave the conference, and allow the other
parties to continue the conversation.

Operating Manual

Document Version 2013-05

1.3.15 Conference

Summary of Contents for KX-NCP1000













































































































































































































































Search results

Summary of Contents for KX-NCP1000

Reviews:

Related manuals for KX-NCP1000

Brands by name

Popular brands

Panasonic KX-NCP1000, Operating Manual

Search results

Summary of Contents for KX-NCP1000

Reviews:

Related manuals for KX-NCP1000

Brands by name

Popular brands