Panasonic KX-NCP1000 Operating Manual Download

Page: 75 / 236

•

The door open will be triggered for a specified time period.

1.3.22 Doorphone Call

Preprogrammed extensions or an outside party can receive a call from a doorphone, and talk to the person
through the doorphone.

To call from the doorphone

Press

doorphone

button.

Doorphone

Talk.

C.Tone

To answer a call from the doorphone

Off-hook.

PT/SLT/PS/SIP Extn.

To call the doorphone

Talk.

Off-hook.

Enter

doorphone

number

(2 digits).

doorphone no.

Enter

C.Tone

PT/SLT/PS/SIP Extn.

•

If no one answers a doorphone call within a specified time period, the call is canceled.

Document Version 2013-05

Operating Manual

1.3.22 Doorphone Call

Summary of Contents for KX-NCP1000













































































































































































































































Search results

Summary of Contents for KX-NCP1000

Reviews:

Related manuals for KX-NCP1000

Brands by name

Popular brands

Panasonic KX-NCP1000, Operating Manual

Search results

Summary of Contents for KX-NCP1000

Reviews:

Related manuals for KX-NCP1000

Brands by name

Popular brands