Panasonic KX-MB263HX Operating Instructions Manual Download Page 21

Page: 21 / 104

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord included in
this unit (KX-MB773/KX-MB783 only).

Do not extend the telephone line cord (KX-
MB773/KX-MB783 only).

* The pictured model is KX-MB783.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device (KX-MB773/KX-MB783 only).

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows (KX-MB773/KX-MB783 only).

* The pictured model is KX-MB783.

Power cord

Connect to a power outlet
(220–240 V, 50/60 Hz).

Telephone line cord

Connect to a single telephone line jack.

[

EXT

]

jack

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

Answering machine (not included)

Network router/Network hub (not included)

Also connect networked computers.

To the internet

LAN cable (not included)

To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).

*1 KX-MB773/KX-MB783 only
*2 KX-MB783 only

Important notice for the USB connection

Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 28).

This model is designed to be used in Czech,
Hungary and Slovakia according to the location
setting feature (KX-MB773EX/KX-MB783EX only).

The default setting is Czech. To change the location
setting, see page 56 (feature #114).

MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 21 Monday, August 6, 2007 11:42 AM

Summary of Contents for KX-MB263HX









































































































Search results

Summary of Contents for KX-MB263HX

Reviews:

Related manuals for KX-MB263HX

Brands by name

Popular brands

Panasonic KX-MB263HX, Operating Instructions Manual

Search results

Summary of Contents for KX-MB263HX

Reviews:

Related manuals for KX-MB263HX

Brands by name

Popular brands