Panasonic KX-HNH100 Operating Instructions Manual Download Page 3

Page: 3 / 60

Accessory information

Supplied accessories

No.

Accessory item/Part number

Quantity

Rechargeable batteries

Handset cover

/PNYNTGCA20SR

Charger/PNLC1055ZW

*1 See page 3 for replacement battery information.
*2 The handset cover comes attached to the handset.

Additional/replacement accessories

Please contact your nearest Panasonic dealer for sales information (page 55).

Accessory item

Model no./Specifications

Rechargeable
batteries

HHR-4DPA

To order, please visit
www.panasonic.com/batterystore

Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset

*1 Replacement batteries may have a different capacity from that of the supplied batteries.

Other information

Design and specifications are subject to change without notice.

The illustrations in these instructions may vary slightly from the actual product.

Trademarks

iPhone and iPad are registered trademarks of Apple Inc.

Android is a trademark of Google Inc.

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

All other trademarks identified herein are the property of their respective owners.

For assistance, please visit www.panasonic.com/support

Introduction

HNH100_(en_en)_0814_ver.050.pdf 3

2014/08/14 11:37:18

Summary of Contents for KX-HNH100





























































Search results

Summary of Contents for KX-HNH100

Reviews:

Related manuals for KX-HNH100

Brands by name

Popular brands

Panasonic KX-HNH100, Operating Instructions Manual

Search results

Summary of Contents for KX-HNH100

Reviews:

Related manuals for KX-HNH100

Brands by name

Popular brands