![background image](http://html.mh-extra.com/html/panasonic/kx-hnc810/kx-hnc810_information-and-troubleshooting-manual_269900009.webp)
9
5�745 GHz – 5�825 GHz
• Do not use the product in Healthcare facilities if
any regulations posted in the area instruct you
not to do so� Hospitals or Healthcare facilities may
be using equipment that could be sensitive to
external RF energy�
CAUTION
Installation and location
• Never install wiring during a lightning storm�
• The AC adaptor is used as the main disconnect
device� Ensure that the AC outlet is installed near
the product and is easily accessible�
• Mount the product on the stable location where
the camera can be adequately supported when
installing�
• Do not mount the product on soft material� It may
fall down‚ break or cause injury.
• Do not mount the product on the following
materials: gypsum board‚ ALC (autoclaved
lightweight cellular concrete)‚ concrete block‚
plywood less than 25 mm (1 inch) thick‚ etc�
F
or best performance
Product location/avoiding noise
• This product uses radio waves to communicate
with a wireless router�
• For maximum coverage and noise-free
communications‚ place this product:
– at a convenient‚ high‚ and central location with
no obstructions between this product and the
wireless router�
– away from electronic appliances such as TVs‚
radios‚ personal computers‚ wireless devices‚ or
other phones�
– facing away from radio frequency transmitters‚
such as external antennas of mobile phone cell
stations (Avoid putting this product on a bay
window or near a window�)
• Coverage and transmission quality depends on
the local environmental conditions�
• If the transmission quality is not satisfactory‚ move
this product to another location�
Environment
• Keep the product away from electrical noise
generating devices‚ such as fluorescent lamps
and motors�
• The product should be kept free from excessive
smoke‚ dust‚ high temperature‚ and vibration�
• Do not expose this product to direct sunlight or
other forms of powerful light such as halogen lights
for long periods of time� (This may damage the
image sensor�)
•
Do not place heavy objects on top of the
product�
• When you leave the product unused for a long
period of time‚ unplug the product from the
power outlet�
• The product should be kept away from heat
PNQX8829ZA_M1_ITG_(en)_0208_ver100.pdf 9
2019/02/08 19:44:17