![background image](http://html.mh-extra.com/html/panasonic/kx-hnc810/kx-hnc810_information-and-troubleshooting-manual_269900006.webp)
6
LED indicator
Status
Off
• No power
• LED indicator is turned off
*1
Yellow‚ lit
Not registered to your wireless router (usually for initial setup) or signal level is good
*2
Green‚ blinking quickly
Camera is searching for your wireless router
Green‚ lit
Registration successfully completed
*3
or signal level is strong
*2
Red‚ lit
Registration failed
*3
‚ signal level is weak
*2
Blue‚ lit
Registration to your wireless router successfully completed or camera is on
*1
Yellow‚ blinking slowly
Initial setup is being performed using WPS on your router
Green‚ blinking slowly
Registration mode or updating
Red‚ blinking
• Camera is out of range of your wireless router
*2
• Wireless LAN connection failed
White‚ lit
Privacy mode is on
*1
Red‚ blinking slowly
• Streaming data
*1
or detecting motion
*1
• Accessing microSD card (when privacy mode is off)
White‚ blinking slowly
Accessing microSD card (when privacy mode is on)
*1
You can configure the camera so that its LED indicator does not light during normal operation. For more
information‚ access the User’s Guide (page 3)�
*2 The signal level (strong‚ good‚ weak‚ out of range) is shown for 3 seconds after pressing
SETUP
button�
*3 Lights for 3 seconds after registration is successfully completed or failed�
PNQX8829ZA_M1_ITG_(en)_0208_ver100.pdf 6
2019/02/08 19:44:17